- This grid will show you how to access the K and G menu to setup your grids with a beacon and renaming them so they do not get cleaned up.
- It is the players responsibility to name his or her grids and placing a beacon on his or her grids.
- Renaming your grid is very simple:
- Look for the Grid Name:
- Once you have named the Grid your next step should be to setup a beacon
- When you place a beacon you will see the shell or if you build it fully it will look like below.
This grid will show you how to access the K and G menu to setup your grids with a beacon and renaming them so they do not get cleaned up. #
It is the players responsibility to name his or her grids and placing a beacon on his or her grids. #
1. Cleanup will erase all grids with the names NPC, Small Grid and Large Grid.
2. These grids will not be replaced nor restored it is your responsibility to rename grids
Renaming your grid is very simple: #
Layout your grid and by default it will name itself either Large or Small Grid. Once you have done this add a cockpit or sometime of control panel. Press “K” button on a keyboard or on Xbox controller little button left of Xbox controller logo be a select to access the info tab. Proceed to the ‘info’ tab as seen below.
Look for the Grid Name: 
#
Once you have named the Grid your next step should be to setup a beacon #
- Press the ‘G’ Menu or on Xbox controller press the left bumper pressed in to cycle options
- Search for ‘Beacon’
- Click on it
- Place it
- Beacons do not need to be fully created
When you place a beacon you will see the shell or if you build it fully it will look like below. #
That is it all your grids are now safe from the Odin clean up!
Please remember that if you do not follow these direction in this guide we are not responsible to restore your grids and we will not restore grids that are cleaned up for non proper naming convention